×
×
×
"/>

Review your cart

Your cart is empty

Products ordered before 2 PM EST ship the same day. Orders placed after 2 PM EST will ship the next business day.

J&L Oil Separator 3.0 Passenger Side (2021-2022 Ford F-150 3.5L PowerBoost; 2022 Ford Expedition 3.5L EcoBoost)

(4 reviews) Write a Review
$159.00
SKU:
3028P
CARB Status:
NOT CARB EXEMPT
Instructions:
Click to Download PDF
Extension Compatible?:
YES
Hurry! Only left

Keep your Ford F-150 or Expedition running like the day it rolled off the showroom floor with a J&L Oil Separator.  Not only do our catch cans look great, they protect your engine from oil blow-by and the damage it can cause, including loss of power, reduced gas mileage, and costly engine repairs.

All our oil separators come with an industry-leading lifetime warranty.  Get yours now!

FITMENT:

2021-2022 Ford F-150 3.5L Powerboost

2022 Ford Expedition 3.5L EcoBoost

J&L 3.0 Oil Separator

3oz Capacity
Solid billet construction.
OEM Style quick connect PCV fittings
Multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake.

Looking for more capacity?

This application is compatible with our reservoir extension, increasing the capacity from 3oz to 6oz total.  Click this LINK for more info!

How does it work?

During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. 

Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1/2" thick 1/16th" aluminum honeycomb filter where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it's too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.

WHY J&L?
Our kits are easy install, service and flat out work! Many kits use OEM hoses or come complete with all hoses, custom brackets and hardware for an OEM look. Retain stock hose if you ever return to stock.

 FREE SHIPPING WITHIN US

*This product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.

4 Reviews Hide Reviews Show Reviews

  • J&L Oil Separator 2021F-150
    5

    Posted by David Reese on 2022 Feb 19th

    One of the easiest of things to install, I wasn't expecting it to work as well as it does, the colder weather, is filling it Quick.. I'm waiting for the Extension to get here, I'm afraid of an Overfill with only 3 Oz of space..

  • F150 PowerBoost Oil Separator
    5

    Posted by Michael on 2022 Jan 4th

    To put it mildly, the install was a breeze. Follow the video and it goes in just fine, done in 15 minutes or less. If you have the in-laws over, do what I did and ignore the video and proceed to freeze in the cold wind for an hour and make like it's some rocket science project or that you couldn't find your 10mm socket.

    I mean, we always blame not having the 10mm socket anyway. Might as well put the excuse to good use.

  • Always a breeze.
    5

    Posted by Andrew S on 2021 Dec 26th

    This is the second separator I’ve purchased and both installs were a breeze. This company provides the best quality product possible, well thought out. I will install 2 more when our Expedition and WildTrak arrive.

  • Super Easy Install
    5

    Posted by Steve Green on 2021 Dec 23rd

    Just got my J&L Oil Separator for the 2021 Ford F150 Powerboost engine. Arrived within one week of ordering. The box came with a card that had a QR code to view an install video. The video was super helpful and made my install a snap. Very little to assemble. Only needed a Phillips head screwdriver and a ratchet with 10mm deep socket. Install took all of 15 minutes after watching the video. No modifications required to anything and it can easily be removed when I sell.
    Fit and finish was perfect. Very glad I waited for this kit which uses the factory connectors and existing mounting point on the vehicle.

Oil Separator Frequently Asked Questions

Inside the oil separator there is a filter. The filtered side of the can should always go to the PCV valve or “dirty” connection. The filter is what turns the oil vapor into liquid form to be collected in the basin of the unit. You want this to happen as it is entering the can. The open port will run to your intake.

In most cases you only need an oil separator on the PCV side (dirty side) of the engine. This is the side that is under vacuum/suction most of the time while the vehicle is running and driving. The clean side typically is only used for venting when the PCV valve is closed which is under moderate to high acceleration.

Some turbo vehicles can see oil in the clean side, such as Ecoboost F-150’s when they are exposed to frequent towing conditions.

On non-turbo applications anything short of road course racing you typically will not see a drop of collection out of the clean side.

For most Ford applications there is a grey or green tab, you press in this larger tab. It is a button; it will release the fitting and you pull up on the fitting with the button pressed. ***DO NOT REMOVE THE CLIPS FROM THE FITTING! YOU WILL BREAK THEM!!***

For GMC/Chevy applications there is a single button release. This release and the location of some of these fittings can be tricky. You must press the bottom squarely and pull the fitting straight off. Many people make the mistake of pressing the button too hard and it flexes the release. Take your time and it will release. The 5.3L intake fittings are the toughest due to their location.

Most applications average about an ounce of oil every thousand miles. However, there are many factors in collection rate as every single engine is different. Factors such as driving style, climate, engine condition, oil level all vary and effect collection rate.

People in cold climates will have to check their oil separator more often in the winter months due to condensation build up occurring in the oil separator itself. In these months, the air entering the can is significantly hotter than the ambient air temp. This results in condensation build up (think hot shower in a cold bathroom).

We recommend everyone to check their oil separator at 500-1000 miles of driving to get an idea of how often it needs to be serviced. The can holds 3 ounces without the optional extension.

Your J&L Oil Separator is Guaranteed for Life! Click here for more details on your J&L Oil Separator Co. Warranty

Every 15K+ Miles you will want to thoroughly clean the oil separator, Click here to view the How-To video

The specs on the screws are M4 x .7 x 10mm, they can be found at just about any hardware store.

Sometimes when the oil separator is over tightened it can be tough to remove; also some oil separators are much more accessible once installed than others.

If you are having trouble removing the oil separator reservoir, try removing it from the bracket or even vehicle to get a better grip on it. For units that are really tough, we recommend a rubber oil filter strap wrench. You can use this in combination with a rag and typically remove them without damage.

When reinstalling the can bottom, treat it like an oil filter. Screw the can to the bottom of the O-ring. Give it another ¾ to 1 full turn. No more, no less.

No! Dispose of this nasty oil that is mixed with fuel, water and everything else where you would dispose of your oil change oil. Many auto parts stores will take your old oil for free of charge.

If you read the fine print on any warranty contract you will find a lot of reasons your warranty can become void; installing aftermarket parts can be one of them.

However, per the Magnuson–Moss Warranty Act proof would have to be provided that the after-market part caused the failure.

If you need further clarification, contact your vehicles service department. Some are easier to deal with than others.

Ordering Frequently Asked Questions

You will receive automated emails through our website when an order is placed and when the status is changed.

Gmail users will often find these emails under the “promotional tab”.

Yahoo users will often find all our order updates in their spam/junk folder.

When your order ships you will often get emails from the shipping service with tracking, your order in your customer portal will also have the tracking information.

Please be sure to check these folders prior to contacting us for further updates.

You can view our Return Policy by Clicking Here

We primarily use USPS and UPS for our shipping services, if you require expedited shipping or specific service please call 757-842-6497 to place your order or to get shipping quotes.

Small items such as replacement parts typically ship USPS First class mail.

Canadian orders placed through the website all ship USPS Priority International.

Related Products

Customers Also Viewed